Series Vents TT EC

Use

• Supply and exhaust ventilation and air conditioning systems of various premises requiring cost-saving controllable ventilation.
• The best ventilation solution for exhaust ventilation of bathrooms, kitchens, pools, bars, restaurants, offices, manufacturing facilities, and more.
• Compatible with Ø 4” up to 10” round air ducts.

Motor

• High-efficient electronically commutated direct current motors combined with mixed-flow impellers. Such motors are the most state-of-the-art energy saving solution. Power consumption of EC motors is 35 % less as compared to standard motors. The fans with EC motors have excellent aerodynamic performance and low-noise operation.
• EC motors are featured with high performance and total speed controllable range.
• High efficiency reaching 90 % is the premium advantage of the electronically- commutated motors. The motors are equipped with ball bearings designed for at least 40 000 operating hours.

Design

• Durable, impact-resistant and corrosion-free ABS-plastic casing.
• Aerodynamically shaped casing.
• Airtight terminal box for connection to power mains.
  

Speed control

• The fan is operated with a 0-10 V signal by integrated or external controller (ordered separately). Intergated controller can be performed as a small potentiometer on control board (basic model) or as a knob on terminal box (option P).
• The air capacity can be controlled depending on air temperature, pressure level, smoke content, etc.
• The speed of the EC motor changes proportionally to fluctuations of the control parameter and the fan delivers a required air volume to the ventilation system. Maximum fan speed does not depend on the current frequency.
• The fans may be integrated into a building management systems. The specially designed software provides precise control of all the fans integrated into the system.

Mounting

• The fans are designed for duct mounting in any point of the ventilation system with the casing mounted at any angle. In case of vertical mounting a protective outer hood must be installed on the top.
• Fixation to the floor, wall or ceiling is performed with the supplied mounting brackets.
• Electric connection and installation must be performed in compliance with the manual and the wiring diagram on the terminal box.