New products

  • Brig HRV 200, 300Brig HRV 200, 300 new series *

    A Heat Recovery Ventilator is a complete whole house ventilation system designed to bring a continuous supply of fresh air into the house while exhausting an equal amount of contaminated air.

  • TT...U seriesTT...U series new series *

    The VENTS Turbo Tube U Series combines the features and benefits of both axial and centrifugal fans. Used for both supply and exhaust applications that require high pressure, powerful airflow and noise levels. Maximum capacity - 1050 CFM.

  • Brig HRV 120, 170Brig HRV 120, 170 new series *

    A Heat Recovery Ventilator is a complete whole house ventilation system designed to bring a continuous supply of fresh air into the house while exhausting an equal amount of stale air.
     

Brig HRV 120, 170  new series  *

Brig HRV 120, 170

A Heat Recovery Ventilator is a complete whole house ventilation system designed to bring a continuous supply of fresh air into the house while exhausting an equal amount of stale air.
 

Show as:

Products in this series (2)

  • HRV	120

    HRV 120

    HRV	170

    HRV 170

  • HRV	120

    HRV 120

    Maximum capacity - 177 CFM.

    HRV	170

    HRV 170

    Maximum capacity - 193 CFM.

Features
  • Efficient recovery ventilation
  • Cross flow core with recuperation efficiency up to 80%
  • Silent operation
  • Replaceable filters
  • Simple installation and maintenance
  • Compact size
  • Defrost system
Casing

Steel casing is covered with high-quality multilayer aluminium and zinc alloy to prevent corrosion. The casing is equipped with a pilot switch to turn the ventilator off when the service panel is opened.

Filter

Washable G4 air filters in exhaust and supply air streams.
Optional supply: anti grease filter.

Heat recovery core

Specially designed polymer plate core ensures excellent heat recovery efficiency. Whenever heat recovery is not required, the heat recovery block can be easily replaced by a "summer" block. The ventilator is also equipped with a drain pan for condensate drainage.

Defrost system

To protect the heat recovery core, the freezing electronic protection system is applied. It switches the supply fan off as the temperature sensor requires. Warm extract air defrosts the heat recovery core, then the supply fan switches on and the ventilator continues operating under rated conditions.

Motors

German made high efficient motor combined with backward inclined impeller delivers exceptionally powerful airflow and high static pressure. Built-in thermal overheating protection with automatic restart makes the motor operation secure and reliable. Permanently lubricated ball bearings inside the motor provide long (40000 hours) trouble- and maintenance-free operation.

Fans

The ventilator is equipped with supply and exhaust centrifugal fans with backward inclined blades and built-in thermal overheating protection with automatic restart. The electric motors and the impellers are dynamically balanced in two planes.

Control

The ventilator is equipped with 3-step switch on it's side panel to choose STANDBY, LOW or MEDIUM mode for continuous operation.

The unit can be equipped with wide range of additional controls (page 24) to switch boost on demand.

Mounting

The ventilator is floor mounted or suspended to the ceiling with special belts.

The ventilator is suitable for installation in service spaces as balcony, storeroom, basement, roof space or in main premises above the suspended ceiling, in the pocket. Mounting in any position must provide correct condensate drainage. Access for the maintenance shall be reserved at the side of the swing-out service panel.

Warranty

5 years warranty

E-mail

Please, feel free to contact us.

sales@ventsus.com

Phohe

Customer service.

513-348-3853
1-888-640-0925

Online form

Send a message center customer support.

Send

Accessories

  • KOM series

    KOM series

  • Hose clamps C

    Hose clamps C

  • Air disc valves

    Air disc valves