The VENTS Turbo Tube U Series combines the features and benefits of both axial and centrifugal fans. Used for both supply and exhaust applications that require high pressure, powerful airflow and noise levels.
Compatible with 4”, 5”, 6”, 8”, 10”, and 12” diameter ducts, the fan’s casing is made of high quality, UV resistant plastic. Turbo Tube’s have long-life ball bearing two-speed motors and thermal protection to prevent motor burnout.
The VENTS Turbo Tube...U Series (TT...U) fans have built-in temperature and speed control which are the ideal solution for intake and exhaust ventilation of premises where air temperature control is necessary (i.e., greenhouses).
Simply set the desired operating temperature with one knob, your minimum speed with the other knob and let the fan do the rest.
Excellent aerodynamics & Low noise
The unique motor, powerful mixed flow impeller and special aerodynamic casing combination enables the VENTS Turbo Tube...U Series (TT...U) fans to deliver superb airflow performance even at higher static pressures typically found in extensive ventilation systems. This impeller and internal aerodynamic guide vanes provide a smooth laminar air flow which in turn minimizes turbulence and noise, and generates an excellent air flow to pressure performance ratio.
Built-in temperature and speed control
When the temperature exceeds the previously set temperature the speed controller starts the fan on the set speed. As the air temperature drops below the set temperature the control switches the fan off. As soon as the air temperature rises again and the temperature sensor exceeds the previously set temperature, the motor automatically switches to the set speed. As a result, the fans only run when needed. Temperature settings range from 70°F to 95°F.
Easy to Install & Cleaning
The VENTS Turbo Tube...U Series (TT...U) Fans were engineered to be compact without any loss in performance. This means it can fit
nicely into limited spaces. Fans include a “removable body” feature that enables the motor-impeller assembly to be completely removed
for cleaning or replaced without the need to interfere with the attached ducting.
Technical Specifications
Voltage: 120V 60Hz
Motor: Single-phase asynchronous motor
Duct compatibility: 4”, 5”, 6”, 8”, 10”, 12”
Airflow capacity: up to 1050 CFM
Sones: 2.42 – 4.48
Power consumption: 36 – 352,9 W
Suitable for working airstreams up to 140° F
IP X4 Protection
Thermal Overload Protection
Built-in temperature control knob
Built-in speed control knob
Cable with plug included
Five years warranty
Green house ventialation example based on TT...U fan.
